KNX ENO 610/612

Device

KNX ENO 610/612 is shipped in a on-wall mounted housing, for operating the EIB/KNX has to be connected. The KNX ENO 610 and 612 devices differ only in the housing; their functions are identical. KNX ENO 610 has a particularly compact design. KNX ENO 612 is suitable for mounting on a recessed wall box or on material with poor radio penetration properties (e.g. metal or concrete).

Configuration

The function of each channel is selected with the ETS software by parameter. Depending on the selected function the enocean telegrams are mapped to up to 6 communication objects. After programming the device with ETS the radio sensors can be learned. For that purpose two keys and a LCD are placed in the device. While learning a channel the LCD shows the actual channel number and assignement. Touch sensors can be configured as one-key control or as rocker. Up to 4 keys/rockers can be connected to one channel.

If function “Window contact” is chosen as well up to 4 sensors can be linked with one channel. “Window open” is signaled via EIB/KNX, if at least one window is opened, “Window closed” is transmitted only, if all windows are closed.

With functions for temperature, humidity and brightness chosen only one sensor per channel can be assigned.

List of compatible devices

In the following table all device tested with the gateway are listed. Devices constructed in the same way or sensors with compabtile telegram format to the listed below can be used also with the gateway.