Leer

KNX IO Overview

With the new KNX IO series, Weinzierl is expanding its product range with universal inputs and outputs for KNX with a width of only 1TE (18mm). This granularity offers maximum flexibility especially for small and medium-sized plants.

Consistent operating concept
All devices are presented with a consistent operating concept with 3 multi-colored LEDs and 2 buttons for manual operation. An easy-to-install design with screw terminals for easy plugging in and out helps reduce costs on the construction site. All devices can be configured with the ETS software without plug-ins and are characterized by short download times.


Overview

 Model KNX IO 410 KNX IO 411 KNX IO 510 KNX IO 511 KNX IO 520
           
 Art. #  5230 5231 5224 5232 5225
 Type Binary input Binary input Switching
actuator
Switching
actuator +

binary input
Blinds
actuator +

binary input
 Input 4 binary in
12-230V 
4 binary in
for dry contacts 
 - 2 binary in
12-230V
 2 binary in
12-230V
 Output - - 2 bi-stable out
230V~ 8A 
1 bi-stable out
230V~ 8A 
1 blinds out
230V~ 8A 

Download this table



Get to know all devices of the new KNX IO series with our KNX IO StarterKit:

  • KNX IO 410 Art.-No. 5230
    Binary input with 4 channels for controlling light, blinds, etc. with conventional switches or contacts. The inputs can be controlled with an external voltage of 12 to 230 V.
  • KNX IO 411 Art.-No. 5231
    Binary input with 4 channels for controlling light, blinds, etc. with conventional switches or contacts. The inputs are suitable for potential-free contacts.
  • KNX IO 510 Art.-No. 5224
    Switch actuator with two channels. The device offers universal relay outputs with scene switching, time and staircase lighting. In addition, the device allows the control of heating valves (PWM for thermal actuators).
  • KNX IO 511 Art.-No. 5232
    Switch actuator with one output and two binary inputs. The output provides a universal relay output with scene switching, time and staircase lighting. In addition, the device allows the control of thermal actuators.
  • KNX IO 520 Art.-No. 5225
    Shutter actuator with one channel and two binary inputs. The actuator is used to control a roller shutter or a blind. The inputs can be connected to conventional switches with an external voltage of 12 to 230 V

 The five devices come together in one box. Please note that this is a limited offer - so don't wait too long.